Click for reviews
|
Concorde Sun Xtender PVX-2120L 4D 12 Volt AGM Solar Battery
SKU PVX-2120L
Concorde® Sun Xtender® PVX-2120L 4D 12 Volt AGM Solar Battery
VRLA-AGM Deep Cycle Battery for Off Grid and Grid-Tied Systems
The Concorde Sun Xtender PVX-2120L AGM battery is a sealed, valve regulated lead acid (VRLA), absorbed glass mat (AGM) battery designed for off-grid solar power systems. This model features "L" Blade (solid copper) terminals. All Sun Xtender batteries are supplied with silicon bronze bolts, nuts, and washers required for installation.
Concorde batteries have been proven and adopted by worldwide commercial and military users. Concorde now offers Sun Xtender® solar batteries that are application design specific, engineered and produced for consistent, dependable power requirements for demanding remote off-grid solar power.
The non-spillable construction allows this battery to be used upright or on its end or side and the maintenance-free AGM design means no water replenishment ever. Utilizing pure lead-calcium grids, the plates are thicker than the industry standard for longer cycle life, increased reliability and power. The low impedance AGM design allows for excellent charge acceptance and there is no current limit required with controlled voltage charging.
As with the whole Sun Xtender® family, these new products feature Concorde’s proprietary PolyGuard™ Microporous Polyethylene Separator that shields the positive plates against shorting, shock or vibration. No other manufacturers offer this dual layer insulation protection feature. Sun Xtender® battery covers and containers are molded with high-impact, reinforced copolymer polypropylene and are designed with thick end walls to prevent bulging.
Toll-Free: (877) 297-0014
Authorized Concorde Sun Xtender Vendor
With decades of experience, Solar Electric Supply has the friendly, knowledgeable staff for just about any large battery powered project. Contact us for wholesale pricing and expert system design.
Concorde Sun Xtender PVX-2120L AGM Battery Review
- Copper Alloy Terminals for improved electrical connections.
- No exposed lead terminals. This change was incorporated to improve environmental safety and health.
- Threaded insert terminals are recessed to prevent short circuits across battery connections.
- New cover is flat top design. No protruding or exposed vent valves.
- Built in lifting handles.
- Reinforced container walls to reduce bulging.
- High Impact Strength Copolymer Polypropylene Case and Cover.
- Completely Sealed Valve Regulated Construction.
- Immobilized Electrolyte Non-Spillable.
- Maintenance Free Design Never Requires Watering.
- Absorbed Glass Mat (AGM) Micro-porous Glass Separators retain electrolyte.
- Flame Arresting Pressure Regulated Safety Valves.
- UL Recognized Systems Component.
- Positive Plates - Proprietary Lead Calcium Alloy- Negatives Plates - Lead Calcium.
- Low Self Discharge Rate Approximately 1 % per month at 25°C (77°F).
- Operate over a Wide Range of Temperatures from -40°C (-40°F) to +72°C (+160°F).
- Classified as "Non-Spillable Battery" for transport. Complies with DOT HMR49, Non-Hazardous Materials.
 |
This AGM solar battery is ideal for powering telecommunications, island power, cellular radio, microgrid, remote wi-fi, wind farms, railroad signs/communication, remote residential, grid-tie battery backup, and uninterruptible power sources (UPS).
Toll-Free: (877) 297-0014
Authorized Concorde Sun Xtender Vendor
Contact us for wholesale Concorde Sun Xtender PVX-2120L battery pricing and complete systems.