Click for reviews
| Q CABLE MODELS | ||
| Enphase Model Number | Connector Spacing | PV Module Orientation |
| Q-12-10-240 | 4.2 ft. (1.3 m) | Portrait |
| Q-12-17-240 | 6.5 ft. (2.0 m) | Landscape (60-cell) |
| Q-12-20-200 | 7.5 ft. (2.3 m) | Landscape (72-cell) |
| Max Nominal Voltage: 250 VAC | ||
| Q CABLE SPECIFICATIONS | |
| Voltage Rating | 600V (connector rating 250V) |
| Cable Temperature Rating | 194° F |
| Certification | UL3003, DG cable |
| Flame Test Rating | FT4 |
| Compliance | UL1703, EN62109, UL6703A |
Enphase Q Cable & Field-Wireable Connectors
SKU Q-12-x
Enphase Q Cable & Field-Wireable Connectors
• Two-wire, double-insulated Enphase Q Cable is 50% lighter than the previous generation Enphase cable
• New cable numbering and plug and play connectors speed up installation and simplify wire management
• Link connectors eliminate cable waste
Field-Wireable Connectors
• Easily connect Q cables on the roof without complex wiring
• Make connections from any open connector and center feed any section of cable within branch limits
• Available in male and female connector types
Enphase Q Cable Design Flexibility
One of the inherent limitations of string inverter systems is the need to always complete a loop in the electrical design. With these DC power systems, there’s no opportunity to branch off to islanded arrays on complex rooftops or in response to on-the-fly design changes.
The field-wireable connectors designed for Enphase Q Cables in the IQ System allow for safe and simple connections from any open connector and the ability to center feed any section of cable up to a 20-amp limit. This flexibility in wire connections allows the system to be built as a tree with branches rather than a constricted linear design. The lighter two-wire Q Cable also makes it easier to handle wire management. To streamline the installation process, Q Cables may be fastened to rails or to the module frame using standard clips in a rail-less mounting system.
The IQ System replaces numerous electrical balance of system components with the Enphase Q-Aggregator supporting up to three branch circuits and accepting the same plug-and-play Q connectors that connect to the IQ microinverters.
Installers also have the option of using standard electrical components to transition branch circuits from the roof to the Enphase IQ Combiner Box with consolidated metering and networking equipment, including a preconfigured IQ Envoy communications gateway, at ground level. The IQ Combiner Box combines up to four electrical enclosures into one, eliminating the need for a separate subpanel, meter enclosure, Envoy enclosure, and AC disconnect, as well as all the hardware to connect these pieces together.
Residential Enphase IQ Microinverter Solar Systems
Solar Electric Supply provides complete Enphase solar systems and design at a low wholesale price.
These pre-engineered PV systems include IQ 6 microinverters, roof or ground mount, Envoy Energy Management Unit (EMU), Q-Aggregator, Q cables, disconnects and breakers. We support our customers in the US with friendly knowledgeable staff that is here to help with your microinverter solar system questions.
Contact us toll-free at (877) 297-0014.
Enphase Q Cable Accessories
 Q Cable TerminatorTerminator cap for unused cable ends, sold in packs of ten. Q-TERM-10 |
 Sealing CapsSealing caps for unused Q-BA-CAP-10 & Q-SEAL-10 |
 Disconnect ToolPlan to use at least one per installation, sold in packs of ten Q-DISC-10 |
 Cable ClipUsed to fasten cabling to the racking Q-CLIP-100 |
Name |
Model Number |
Description |
|---|---|---|
| Enphase Q-Aggregator | Q-BA-3-1P-60 | Combines up to three microinverter branches into one home run |
| Field-wireable connector (male) | Q-CONN-10M | Make connections from any Q Aggregator open connector |
| Field-wireable connector (female) | Q-CONN-10F | Make connections from any Q Cable open connector |
| Cable Clip | Q-CLIP-100 | Used to fasten cabling to the racking or to secure looped cabling |
| Disconnect Tool | Q-DISC-10 | Disconnect tool for Q Cable connectors, DC connectors, and AC module mount |
| Q-Aggregator sealing caps (male) | Q-BA-CAP-10 | Sealing cap for unused Aggregator connections |
| Q Cable sealing caps (female) | Q-SEAL-10 | One needed to cover each unused connector on the cabling |
| Terminator | Q-TERM-10 | Terminator cap for unused cable ends |
| Replacement DC Adapter (MC4) | Q-DCC-2 | DC adapter to MC4 (max voltage 100 VDC) |
| Replacement DC Adapter (UTX) | Q-DCC-5 | DC adapter to UTX (max voltage 100 VDC) |
Complete Enphase IQ Microinverter solar systems and quantity discounts available.
Contact us toll-free: (877) 297-0014
Contractor Discounts Available • Enphase Microinverters
Contact us for sales, low wholesale prices and expert reviews for Enphase Q Cables.