MAPPS 4-Battery Class 1 Division 2 Outdoor System Enclosure
The product is in stock
Usually shipps in less than 24 hours
SKU
AL-POL-4-G27-D2-HZ
battery enclosures for Class 1 Div 2 hazardous locations
Class 1 Division 2 Solar Battery Enclosures
MAPPS 4-Battery Class 1 Division 2 Outdoor System Enclosure
Class 1 Div 2 solar battery enclosure shown with 4 sealed gel batteries.
Industrial Strength ยท Class 1 Division 2 Design
The weatherproof outdoor enclosure of the MAPPS AL-POL-4-G27-D4-HZ Class 1 Division 2 Battery & Control Enclosure features a NEMA 4X sealed top compartment for sensitive electronics. Filters for the louvered vents are located in the NEMA 3R rated battery compartment below. This enclosure is listed for use in Class 1 Division 2 Hazardous Locations.
This C1D2 solar battery box holds 2-4Group 27 sealed 12 volt batteries in the NEMA 3R vented compartment. The NEMA 4X rated sealed top compartment comes pre-wired with a solar charge controller and wiring harness with load breakers installed on aluminum backplate and DIN rail. A two-conductor cable leads to the lower vented battery compartment. The NEMA 4X sealed compartment is required in Class I Div II Hazardous Locations to safeguard against danger of potential electronic equipment sparking.
D4 Class 1 Div 2 Solar Battery Box Enclosure Details
Pre-wired charge controller included.
Features two draw-latches that are lockable for up to a 3/8" max shackle.
NEMA 3R enclosure with NEMA 4X sealed compartment
White polyester powder coat
Stainless steel hinged doors
4 padlockable draw latches w/ 3/8" max. shackle
Filtered louvered vents for battery compartment
16"H X 14"W X .125" aluminum backplate with standoffs
Room in sealed compartment for control panel & electronics
Bracket for pole/wall mount, U-Bolt provided with pole specification
Conduit knockouts for easy connections of solar PV & loads
Stainless steel enclosure option available
Can accommodate: 2X 8G27, 4X 8G27 batteries.
Certifications
Conforms to: ISA STD 12.12.01 & UL STD 508A. The UL STD 508 certification is required for Class 1 Division 2 Hazardous Locations. This enclosure is used in our Class 1 Division 2 solar systems.
Class 1 Div 2 Solar Battery Power Applications
No matter what extreme environment on Earth: arctic, desert, coastal or tropical, this corrosion-resistant enclosure is ideal for your next remote Class I Division II Hazardous Location project.
Solar battery powered C1D2 examples can include:
flow measurement & monitoring, level measurement, pipeline security, wireless communication, well site automation, environmental monitoring, chemical injection pumps, SCADA and UPS battery backup systems.
Contact us with your solar powered application today. OEM pricing available.
Solar Electric Supply specializes in supplying dealer, contractor, government and industrial accounts worldwide with reliable, cost-effective Class I Div II solar electric power solutions.
Contact us toll-free: (877) 297-0014 for expert assistance and wholesale prices for the SES MAPPS AL-POL-4-G27-D4-HZ C1D2 4-Battery Class 1 Division 2 Solar System Enclosure.
Click for reviews
Pre-wired charge controller included.
