MAPPS AL-POL-2-D2-HZ-UL C1D2 Solar Battery Enclosure

2-Battery UL Listed Outdoor Solar Battery Enclosure for Class 1 Division 2 Systems

The weatherproof outdoor enclosure of the MAPPS AL-POL-2-D2-HZ-UL Class 1 Division 2 Battery & Control Enclosure features a NEMA 4X sealed top compartment for sensitive electronics. Filters for the louvered vents are located in the NEMA 3R rated battery compartment. This enclosure is UL listed for use with our C1D2 Hazardous Systems.

This C1D2 solar battery box holds 1-2 Group 30 sealed 12 volt batteries in the NEMA 3R vented compartment. The NEMA 4X rated sealed top compartment comes pre-wired with a solar charge controller and wiring harness with load breakers installed on aluminum backplate and DIN rail. A two-conductor cable leads to the lower vented battery compartment. The NEMA 4X sealed compartment is required in Class I Div II Hazardous Locations to safeguard against danger of potential electronic equipment sparking.

Features 2 draw-latches that are lockable for up to a 3/8" max shackle.

Pre-wired charge controller included.

MAPPS^® AL-POL-2-D2-HZ-UL Enclosure Features

• NEMA 3R enclosure with NEMA 4X sealed compartment
• White polyester powder coat
• Stainless steel hinged doors
• 2 padlockable draw latches w/ 3/8" max. shackle
• Filtered louvered vents for battery compartment
• 16"H X 14"W X .125" aluminum backplate with standoffs
• Room in sealed compartment for control panel & electronics
• Bracket for pole/wall mount. (U-Bolt provided with pole specification)
• Conduit knockouts for easy connections of solar PV & loads
• Stainless steel enclosure option available
• Can accommodate: 1x 8G30 or 2x 8G30 batteries.

Certifications

Conforms to: ISA STD 12.12.01 & UL STD 508A. The UL STD 508 certification is required for Class 1 Division 2 Hazardous Locations. This enclosure is used in our: Class 1 Division 2 solar systems

Class 1 Div 2 Solar Battery Power Applications

No matter what extreme environment on Earth : arctic, desert, coastal or tropical, this corrosion-resistant enclosure is ideal for your next remote Class I Division II Hazardous Location project.

Solar battery powered C1D2 examples can include:
flow measurement & monitoring, level measurement, pipeline security, wireless communication, well site automation, environmental monitoring, chemical injection pumps, SCADA and UPS battery backup systems.

Contact Us: with your solar powered application today.
OEM pricing available.

Call Toll-Free: (877) 297-0014

• Contact us for availability, pricing and freight quote
• Become an Authorized Solar Electric Supply Contractor or Dealer
• Specials and multi-pallet/container discounts
• Complete residential and commercial grid-tie Solar kits
• Design assistance, Permit submittals, Schematics