Service Temporarily Unavailable

The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.

Quick Mount PV Classic Composition Roof Solar Panel Mount
Skip to content

Quick Mount PV Classic Composition

Quick Mount PV Classic Composition Mount

Quick Mount PV Classic Composition Mount

Available in Mill or Bronze Anodized Finishes Item Code: QMSC

We proudly provide Quick Mount PV's best-selling mount for rooftop installations of PV and solar water heating systems. The Quick Mount PV Classic Composition Mount uses Qblock Elevated Water Seal technology to ensure a long, watertight life on composition/asphalt shingle roofs.

The Classic Comp was also designed to install fast, with just a single bolt and is the most universally code-compliant mount available for composition/asphalt roofs.

MFG Page: Quick Mount PV. Respect The Roof.

Classic Composition Mount Specification Sheet

Know Your Composition Roof Tutorial

Classic Composition Mount Features:

  • Stainless steel hardware (included)
  • 10-Year Warranty; 50-Year Expected Life
  • Works with all leading racks
  • Won't void roof manufacturers warranty
  • Approved for use by leading roof manufacturers
  • Meets or exceeds roofing industry best practices
  • 2554 lbs. average pullout (douglas fir); 2203 lbs. average shear
  • ICC-ES Certified ICC-ES Certified ICC-ESR-2835
  • One bolt installation
  • No shingle cutting
  • 100% IBC Compliant
  • Patent Numbers 7,762,027 & 7,895,808

Made In USA Made In USA

There's no need for trimming shingles to force a fit. Drill one pilot hole into the rafter, backfill it with appropriate sealant, slide the Quick Mount flashing beneath the course above, drive the bolt home and it's done.

The 12 X 12 inch Classic Composition Mount flashing is designed to fit within a standard 5 to 5.5" course and the exposed course should be no greater than 5.75". If the exposure is greater than this, use the Classic Shake Mount as an alternative. There's no shingle cutting and no shingle distortion caused by trying to force a fit. Just a permanent, watertight mount every time!

PV, Solar Water Heating and More

The Quick Mount PV Classic Composition Mount is the logical choice not only for solar PV installation, but also for rooftop solar water heating systems. In fact, whatever you need to fasten to a composition roof - HVAC equipment, antennas, satellite dishes - use Quick Mount PV to secure and protect every roof installation you put your name on.

Ontario Domestic Content Compliant

The Classic Composition Mount is also made by Quick Mount PV Canada in Ontario, Canada and meets the OPA Ontario Feed-in Tariff program's requirement for domestic content.

ICC-ES certification pending in Canadian production

Made In Canada Made In Canada

Quick Mount asphalt

Related Product Information

  1. Solar Panel Mounts
  2. Prosolar Mounts
  3. Unirac Tile Roof Hook
  4. Solar Panel Roof Mounting Systems
  5. ProSolar FastJack
  6. Prosolar Foam Jack
  7. Prosolar Rail Splice Kits
  8. ProSolar Rooftrac Rails
  9. Prosolar Solar Wedge
  10. ProSolar TileTrac
  11. Prosolar Tilt-up Kit
  12. Quick Mount PV Classic Composition
  13. Quick Mount PV Classic Shake
  14. Quick Mount PV QBase Composition
  15. Quick Mount PV Quick Hook
  16. Renusol CS60 Ballast Mount
  17. SnapNrack Ultra Rail
  18. IronRidge XR Solar Panel Roof Mount
  19. IronRidge FlashFoot2
  20. SnapNrack Flashed L Foot Kit
  21. SnapNrack Metal Roof Base
  22. SnapNrack Standing Seam System
  23. S-5! Metal Roof PV Mounts
  24. S-5! Clamps & Brackets
  25. S-5! S-5-PV Kit
  26. S-5! ProteaBracket
  27. S-5! CorruBracket 100T
  28. S-5! VersaBracket
  29. Quick Mount PV E-Mount
  30. Quick Mount PV Quick Rack
  31. Conduit Penetration Flashing
  32. Classic Conduit Mount
  33. Quick Mount PV Roof Mounts
  34. SnapNrack Tile Replacement
  35. SnapNRack Series 100