Click for reviews
 Conext XW 4024 Solar Inverter/Charger |
|
|
Schneider Electric Model Number |
XW 4024 120 240 60 |
| AC Nominal Power | 4,000 Watts |
| Battery Charger Current | 150 Amps |
| Battery Charging Voltage | 24 Volts |
| Peak Efficiency | 94.0% |
| CEC Weighted Efficiency | 91.0% |
| Weight (lbs) | 118.0 |
| Height (in) | 23.0 |
| Width (in) | 16.0 |
| Depth (in) | 9.0 |
Wholesale pricing and expert design for |
Schneider Electric Conext XW 4024 Inverter/Charger
SKU XW 4024
Schneider Electric Conext XW 4024 Inverter/Charger
One solution for off-grid solar or grid-tie battery-backup
(120/240V 60Hz)
The Conext™ XW 4024 120 240 60 inverter/charger is an adaptable pure sine wave, 60 Hz single-phase, split-phase or three-phase inverter/charger system. It has the capability of up to 4,000 watts of reliable continuous output power.
The inverter has powerful grid-tie functionality and dual AC power inputs. The charger can charge a 24 Volt battery bank at up to 150 Amps! This model is the replacement for the Xantrex XW4024 inverter/charger in North America.
A complete Conext power system can feature solar charge controllers, monitoring, and automated generator control modules which enable further adaptability. From a single Conext XW unit to multiple clusters of units, up to 36 kW each, the Conext XW is a scalable system that allows for the integration of solar capacity as required.
Adaptable and scalable, the Schneider Electric Conext XW system is the one solution for global grid-interactive and off-grid, residential and commercial, solar and backup power applications.
XW 4024 Benefits
- The Conext XW4024 is a hybrid inverter / charger, all in one enclosure
- 24 volt batteries are charged with 120 VAC / 240 VAC split-phase or solar panels with optional MPPT charge controller
- Charging with AC power can be accomplished with a generator or grid-power
- Two AC power inputs
Scales to 36 kW for commercial or large urban electrification installations
Supports DC coupled and AC coupled solutions - Battery temperature sensor is included for temperature compensation
- Wall mount is ideal for wiring purposes
- True sine wave provides clean output for sensitive electronics
- NEMA 1 Enclosure for safety and security. Intended for indoor mounting.
Conext XW Inverter Solar System Diagram with Xanbus Networking
Schneider Electric Conext™ XW 4024 60Hz Solar Inverter/Charger Review
The Conext XW 4024 by Schneider Electric is a hybrid Inverter with built-in charger. It will also accept 40V DC to 64V DC from a solar array for charging batteries with the MPPT-60-150 or MPPT-80-600 solar charge controller. It accepts 120VAC and 240VAC for the charging circuit with two AC inputs.
It is typically wall mounted. The XW4024 includes a battery temperature sensor for temperature compensation. Time-tested Xanbus networking developed by Xantrex is used for its communication network.
The robust and reliable XW 4024 is ideal for off-grid solar applications or battery backup for power outages when on-grid supplemented with a solar array.
The XW4024 has a NEMA Type 1 enclosure. This is constructed for indoor use to provide a degree of protection to anybody from touching hazardous parts. It also provides a degree of protection of the equipment inside the enclosure from falling dirt or debris.
Contact us for low wholesale pricing, reviews or expert system design - Toll-Free: (877) 297-0014.
Conext™ XW Inverter System Accessories:
Our experienced, professional staff is just a phone call away for reviews, advice or wholesale pricing on a Schneider Electric Conext or Xantrex XW 4024 inverter/charger.